Hydropower Station CCTV Network Monitoring System provides high-capacity, stable and reliable video transmission for HD video surveillance in key areas of hydropower stations. Through the real-time image, operators can view the monitoring of the dam crest, gate, plant area of the hydropower station, and arrange staff changes and command efficiently. System requirements: 1. the system should have high reliability, maintainability, and sufficient reserved capacity to ensure capacity expansion; 2. the system should have high transmission bandwidth and support Gigabit Ethernet transmission; 3. the system should be easy to test and maintain.
The whole hydropower station video network monitoring system divides the VLANs of multiple different gateways via a layer 3 switch. Among the different LANs of the gateway, it will not affect the normal use of other gateway networks if one of them fails. After the entire network is set up, first ping the switch, network video camera, PC and other devices from the primary to the secondary in the ping mode according to the topology structure, and bind to the specific port through MAC address and IP address of the device. After finish of bound, set a specific IP address for the bound device or port. If you need to add and change devices in the network, first apply to the network management center. After obtaining the license, you will need to add the MAC address record of the device and assign a corresponding IP address to improve security. Finally, the switch device in the network disables the port function for the port that is not applicable.